BitPost 4 litre - Brush On - Timber Stain and Preserver
BitPost ™ is an alternative product for Creosote or Carbolineum. It is a New Zealand manufactured bituminous emulsion / polymer product.
Because of its rot-resisting and disinfecting effect, BitPost ™ is ideally suited for the preservation and staining of wooden structures such as Post and Rail fences, Retaining walls and Construction timber framing etc. It is also suitable to preserve in-ground planted posts.
Timber requires one coat only and One (1) Litre will cover approximately 2 to 3 Square Meters thus 4 Litre will cover 8 to 12 Square Meters. On Post and (3 rails) fence 4 Litres will cover approximately 12 to 16 linear meters, stained on both sides.
BitPost ™ - Brush on is intended primarily for surface application by brushing, dipping or by airless spray equipment.
BitPost ™ - Brush on Gives an economical yet high quality finish which is ideal for larger projects.
A re-coat will be required after 3 to 5 years, where after it will last another 8 to 10 years before coating again.
The colour is black to very dark brown.
BitPost ™ - Brush on is now also available at Cambridge, Thomsons Hamilton, Thomsons Whatawhata and Thomsons Papakura ITM
Features
-
BitPost ™ is an alternative product for the use of Creosote or Carbolimium which has been limited and/or forbidden by some countries due to the introduction of stricter environmental regulations.
- BitPost ™ will retard distortion, movement and splitting of timber, due to weather exposure
- BitPost ™ is non-corrosive to metals
- Can be used on other wood structures
- Suitable on in-ground Posts
- Will penetrate the timber rapidly
- For best results apply to dry timber
-
BitPost ™ is idealy suited for:
- - Horse Fencing : Horses will not nibble on coated fence.
- - Chicken Coops : BitPost will reduce the risk of RED MITE infestation.
- - Vegetable Gardens : BitPost can be used on boxes and stakes.